BMPQV - CONCRETE BONDING ADHESIVE, 9902
- MSDS: BMPQV
- Manufacturer: QUIKRETE CO
- Product Name: CONCRETE BONDING ADHESIVE, 9902
- National Stock Number: 5610-00N025561
Product Identification
Product ID:CONCRETE BONDING ADHESIVE, 9902
MSDS Date:01/01/1988
FSC:5610
NIIN:00N025561
MSDS Number: BMPQV
Responsible Party
ATLANTA, GA 30345
US
Emergency Phone: 404-634-9100
Info Phone: 404-634-9100
Cage: QUIKR
Contractor
Telephone: 404-634-9100
Cage: QUIKR
Ingredients
ACETIC ACID, VINYL ESTER, POLYMER; (VINYL ACETATE
CAS: 9003-20-7
RTECS: AK0920000
FORMALDEHYDE (SARA III)
CAS: 50-00-0
RTECS: LP8925000
Fraction By Weight: <0.5%
OSHA PEL SEE 1910.1048
ACGIH TLV: C 0.3 PPM; A2; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
ACETIC ACID, VINYL ESTER; (VINYL ACETATE)
CAS: 108-05-4
RTECS: AK0875000
OSHA PEL 10 PPM/15 STEL
ACGIH TLV: 10 PPM/15,A3 STEL;93
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
DISPOSE OF SOLIDS IN LANDFILL. EMULSIONS
RTECS: 9999999ZZ
FEDERAL, ST & LOCAL REGS REGARDING HLTH & POLLUTION
RTECS: 9999999ZZ
RECOVERED MATERIAL.
RTECS: 9999999ZZ
SHOWN FORMALDEHYDE TO CAUSE CANCER IN LAB
RTECS: 9999999ZZ
PROPERTIES.THE ODOR DETECTION LEV VARIES AMONG
RTECS: 9999999ZZ
WILL OCCUR FROM RPTD EXPOS BUT SENSITIVITY RETURNS
RTECS: 9999999ZZ
FORMALDEHYDE. WHETHER RISK EXISTS AT LEVS
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:THE PRINCIPAL VOLATILE COMPONENT IS
WATER. MINOR VOLATILE COMPONENTS ARE FORMALDEHYDE & VINYL ACETATE.
BOTH MINOR COMPONENTS WILL MIGRATE FROM EMULSION & ESTABLISH AN
EQUILIBRIUM CNDTN BETWEEN HEADSPA CE IN THE STORAGE CNTNR & LIQ
EMULSION.LEVS IN EXCESS OF TLV'S (2PPM FOR FORMALDEHYDE, 10PPM FOR
VINYL(EFTS OF OVEREXP)
Explanation of Carcinogenicity:FORMALDEHYDE: GROUP 2A (IARC); GROUP 2
(NTP); OSHA REGULATED.
Effects of Overexposure:HLTH HAZ: ACETATE) CAN ACCUMULATE IN NON-VENTED
HEADSPACES ABOVE STORED EMULSION. CARE MUST BE EXERCISED TO VENT
HEADSPACE OF STORAGE TANKS W/HUMIDIFIED AIR. DRUMS SHOULD BE OPENED
IN WELL VENT SPACE. FORMALDEHYDE CONC IN THE WORK PLACE MAYEXCEED
TLV UNDER SOME CNDNTS OF USE. ALTHOUGH FORMALDEHYDE IS A MINOR(SUPP
DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:SKIN: WASH WITH SOAP AND WATER. EYE: IF SPLASHED IN EYE,
FLUSH WITH COPIOUS QUANTITIES OF WATER FOR AT LEAST 15 MINUTES AND
SEEK MEDICAL ADVICE. INGEST: INGEST AMTS ARE NOT ANTICIPATED TO
PRODUCE ADVE RSE HLTH EFTS, BUT SHOULD BE REMOVED FROM STOMACH BY
INDUCED VOMIT/ASPIR. CALL MD. INHAL: REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O*2/ARTF RESP) .
Fire Fighting
Extinguishing Media:FOR DRY POLYMER, USE WATER OR CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
.WHEN POLYMER BURNS, WATER, CO*2, CO & SMOKE ARE PRODUCED.
PYROLYSIS PRODS MAY INCL SUCH MATL (SUPP DATA)
Unusual Fire/Explosion Hazard:THERE ARE NO UNUSUAL FIRE OR EXPLOSION
HAZARDS.
Accidental Release
Spill Release Procedures:IF MATL IS RELS/SPILL, DAM UP TO LIM
SPREAD.MOP UP/ABSORB ON INERT MATL & PLACE IN CNTNRS.IF SPILL
OCCURS IN ENCLSD AREA, VENT.POLYMER MAY BE SEPARATED FROM WATER BY
ADDTN OF ALUM & FERRIC CHLORIDE.FO R FURTHER SPILL PROC REFER TO
ORIGINAL MSDS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL PLACE, AVOID FREEZING.
MINIMIZE CONT W/AIR TO PVNT INNOCULATION W/MICROORGANISMS WHICH CAN
CAUSE DECOMP & MOLDY OVERGROWTH.
Other Precautions:THE PROD WILL IMPART A WHITE MILKY COLOR TO WATER.
WHEN WATER IS AGITATED/IS TURBULENT, FOAMING CAN RESULT. AS
SUPPLIED/DILUTED, PROD MATL (FOAM INCL) WHEN SPLASHED ON AUTOS OR
OTHER PERSONAL PROPERTY IS DIFFICULT TO REMOVE IF ALLOWED DRY.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:IF HEADSPACE VENT IS REQUIRED, USE HUMIDIFIED AIR TO REDUCE
SKIN FORMATION ON THE EMULSION SURFACE.
Protective Gloves:RUBBER PROTECTIVE GLOVES ARE REQUIRED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NORMAL CLEANLINESS SHOULD BE OBSERVED.
Supplemental Safety and Health
FIRE FIGHT PROC:AS ACETIC ACID, ACROLEIN/ACETALDEHYDE. MASKS TO REMOVE
SMOKE & ORG VAP FROM RESP AIR ARE RECOMMENDED FOR USE WHEN FIGHTING
FIRES INVOLVING VINYL ACETATE POLYMERS & COPOLYMERS. EFTS OF
OVEREXP:VOLATILE COMPONENT OF THESE EMULSION PRODS, IT IS IMPORTANT
TO RECOGNIZE THAT RECENT TEST RESULTS HAVE (ING 8)
Chemical Properties
HCC:T6
Solubility in Water:WATER MISCIBLE
Appearance and Odor:WHITE, MOBILE LIQUID, WITH A PLEASANT, SWEET ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
SULFURIC ACID OR ALKALI MATERIALS SUCH AS SODIUM OR METAL HYDRIDES.
Stability Condition to Avoid:COAGULATION MAY OCCUR FOLLOWING FREEZING,
THAWING OR BOILING.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:FOR SM SPILLS (PROBABLY LESS THAN 100 GALLONS),
DILUTE W/WATER. WASH INTO INDUSTRIAL SEWER. (WARNING, CONSULT LOCAL
SEWER AUTHORITY BEFORE DISCHARGING). FOR LRG QTYS, PLACE IN
SETTLING POND & ADD FERR IC CHLORIDE & LIME. DECANT WATER. (ING 5)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.